LOCKOUT TAG OUT (ENERGY ISOLATION)

These under-discussion text lines are taken from the original editable " Lockout tag out (Energy Isolation) Toolbox Talks " by HSE Documents. to download more health and safety and quality documents, keep on visiting my blogsite at hsedocuements frequently. This PPT training file will provide you some information such as what is an energy isolating device in a lockout tag-out procedure? What are the energy sources for lock out/tag out? Can energy-isolating devices be locked out? What is isolation and LOTO? Lockout/tag out safety quiz answers, lock out tag out procedure pdf, lock out tag out examples, lockout tagout procedure, osha lockout/tagout standard pdf, osha lockout/tagout fact sheet, lock out tag out procedure checklist, etc.

Lockout tag out (Energy Isolation)

A. While repair or other work being performed on equipment must be locked out as defined by the Permit to work and Isolation Certificate

B. If a lockout provision does not exist on the equipment, the equipment must be properly disconnected from the power source or otherwise deactivated, unless the nature of the work being performed necessitates that the power is connected or the equipment activated. This requires approval from the OIM.

C. A warning tag must be placed at the point where the equipment connects to a power source and at the location of the control panel activating the power.

The warning tag must state:

1. That the equipment is being worked on, and if the power source is disconnected or the equipment deactivated, the power source must not be connected or the equipment activated.

2. The name of the person placing the tag.

Lock out-tag out

1. The tags must not be removed without the permission of the person who placed the tags, that person‘s immediate supervisor, to their respective relief.

2. It is the responsibility of the OIM, Toolpusher, or Barge Engineer to provide padlocks (if appropriate) and tag out tags. It is also their responsibility to assure that this rule is enforced.

3. Any electrician equipment that has been locked out or tagged out must be done under the authority of a Permit To Work and an Isolation Certificate and have a log entry by the electrician in the “Electrician’s log book”