Grit & Sand Blasting Set Inspection Checklist

To prepare checklist for the Grit & sand Blasting Set inspection, following are some main points:

1. The physical condition of the pump should be good.
2. The power cable should be free from damages and connections have taken through the industrial plug.
3. the cable entry point should be fully packed, so that water can't enter.
4. The junction box of the motor should be free from defects.
5. The on/off switch should be properly insulated.
6. The rotating part of the machine should be covered by a fixed guard.
7. The machine should be grounded as per required OSHA standard and recommendations.

Download File
Grit & sand Blasting Set Inspection Checklist