To prepare the Air Compressor Pre- Startup Inspection Checklist, Please Consider and Use the Following Key Points:
1. Check all piping associated with the compressor including valves and control device.
2. Remove all tools, loose materials and debris
3. Check motor pulley and compressor sheaves for alignment and proper belt tension.
4. Check inlet piping installation and all pressure connections for tightness.
5. Make sure all pressure relief valves are appropriately installed and free/ready to operate.
6. Make sure all belt guards are in place and secure & safe.
7. Check all fuses, circuit breakers and thermal overloads for proper sizing.
8. Open entire/all manual shut-off valves downstream of the compressor discharge.
9. Fill water cooling system properly (if applicable), and check for leaks. evacuation of air.
10. Check proper oil levels in crankcase.
11. Check for any loose connections or loose fasteners.
12. Check for any loose fasteners
13. DOUBLE CHECK ALL THE ABOVE!
14. Check Accessories
a. Hoses / Cables
b. Fittings
c. Whiplash Arrestor / Clamps
d. Spark Arrester/Relief Valve
e. Grounding System
f. Towing Bar & Support / Jack
g. Tire(s)
h. Fire Extinguisher
No comments:
Post a Comment